EXTREME PRESSURE HIGH TEMPERATURE (NO MELT) FOOD GRADE APPROVED MACHINERY GREASE with PTFE
INOX-mx6 GREASE is fully synthetic Extreme Pressure grease formulated to give premium performance and food grade purity. This grease is composed entirely of ingredients which meet the requirements of section 178.3570 of the US FDA regulations and have been cleared for use within registered establishments by the US Department of Agriculture and will not deleteriously affect meat or meat products.
INOX-MX6 GREASE IS FOOD GRADE APPROVED
Australia: Instrument of Approval is available on request.
New Zealand: NZFSA Approved C15 (All animal product except dairy)
SPECIFICATIONS & APPLICATIONS
INOX-mx6 GREASE is smooth light brown grease made with polyalphaolefins and a special bentone thickener. It contains additives to protect against corrosion and oxidation.
INOX-mx6 GREASE is recommended for all bearings and general lubrication and where processing temperatures go well below zero, especially in the refrigerated, frozen foods and beverage industries.
INOX-mx6 GREASE has a temperature range of-30 °C to an extremely high temperature (HAS NO MELTING POINT). It will operate not stop up to 250 °C all day with short bursts up to 300 °C without breaking down.
INOX-mx6 GREASE is highly suitable for all BEARINGS, BUSHES, CHAINS, HINGES, SPROCKETS, SLIDES, SPLINES & COUPLINGS, UNIVERSALS AND BALL JOINTS used in all Food processing Machinery, Beverage Filling Lines, Food Conveyor Lines, Food Packaging Equipment, Ovens, Freezers and Cold Rooms.
INOX-mx6 GREASE also has a wide spread application outside of the food and beverage industry. Because of its Extreme Pressure lubricating ability and NO MELT temperature range.
INOX-mx6 GREASE is highly suitable for all bearings, bushes, universals, etc used in Bitumen Transporting and Laying Machinery, Foundries, Paint Baking Ovens and all other high temperature applications.
INOX-mx6 GREASE is also highly suitable for Truck, Trailer and all Farm Machinery wheel bearings, universals and ball joints, splines and couplings, Tie rod ends, Winches and Trailer couplings.
INOX-mx6 GREASE is highly suitable to use as rubber grease for O rings in all types of machinery and equipment.
INOX-mx6 GREASE can be used for all 0 rings in potable water applications because of its Food Grade rating. Also suitable for O rings and seals on all diving gear. INOX-mx6 GREASE WILL NOT EFFECT RUBBER.
NOTE: INOX-mx6 GREASE is premium grade clay based Extreme Pressure grease. Using it with non-clay based grease can seriously affect its performance. Before using INOX-mx6 GREASE, it is advisable to remove any other non-clay based greases by flushing or pushing out the old grease with INOX-mx6 GREASE in a grease gun.
SIZES & PRICING
30 G Tube (Display Box)/$6.95
30 G Tube (Blister Pack)/$7.50
375 G Tub/$28.50
400 G Cartridge/$32.95
2.5 KG Tub/$149.00
20 KG Drum/$955.00
PRODUCT TECHNICAL DATA (ASTM)
NLGI: 2
Appearance: Smooth, light brown
Penetration at 25°C Worked, 60 Strokes: D.217: 265 min - 295 max
Dropping Point, °C: D.2265 Does not melt
Lower Operating Temp: °C -30
Rust Prevention Rating: D.1743: Pass
Timken, OK Load Kg: D.2509: 23
4-Ball Weld, Kgf: IP.239: 500
Base Oil, cSt at 40°C: D.445 46
at100°C: D.445 7.8
PTFE - Polytetrafluoroethylene is a premium grade anti-friction medium which gives increased lubrication to bearings, bushes, shafts, gears, chains, splines, couplings, winches, cables, universals, CV & ball joints.
